People resize rings for many different reasons. For some it is weight loss or weight glean, and for others it is simply to be able to wear the ring on a different finger. Resizing is very accepted and can be done on most rings, but there are some exceptions. To better understand when sizing can and cannot be done, one must understand the process.
Making a Ring Smaller
Decreasing the band size on a ring is fairly easy when done by a jeweler. For the ring to be made smaller, the jeweler must lop out a itsy-bitsy section of the band. The ring must then be reshaped to the apt circular shape and then it can be soldered benefit together. The jeweler must obtain a weld that is virtually invisible, and it must then be polished and smoothed so that no indication of the sizing is visible.
This device can easily be faded for rings with a dumb shank or band. Rings which are ornate or have a beget which carries around the complete band will need to be rebuilt over the sizing. There is sometimes an residence on ornate rings which has been left for resizing. This space, however, is usually aged for making the ring larger instead of smaller.
Some rings have jewels all around the band or are channel style less than half device around the band, and may require the jeweler to select the gems before sizing. This depends on the setting and pattern. For rings being made smaller, the diamonds or gems may be moved to balance the setting of the ring.
Making a ring larger
Increasing the size of a ring can be done two ways. When a ring needs to be made fair slightly larger, sometimes a jeweler can stretch the ring to the desired size. The ring needs to be gash and an additional allotment of the shank or band soldered in if the size increase is a half size or larger. If a jeweler needs to resize an ornately patterned ring, or one with jewels throughout the band, the sizing can pose a predicament. The jeweler will discuss options with you which may include changing the setting.
Rings not to re-size
You should not try to re-size a ring which has channel region stones more than half method around the band. If the ring has an justify setting or distinct types of gems, some of the stones may need to be removed and reset before the ring can be sized. If the ring is an antique or is an older white gold ring, there may be some discoloration around the repair plot. It is not always possible for the jeweler to know the cause of the discoloration. Most jewelers will obtain every pains to minimize lines or discoloration on the ring. Usually it is only noticeable with the expend of a magnifying glass. It is imperative that you discuss options with your jeweler.
Celtic rings with the invent all the contrivance around the band can be made slightly larger or smaller without distorting the pattern. Increases or decreases of a necessary amount are usually not successful without distortion to the pattern.